The
IPC D2000 controller is designed to work with 110V DC door operators
manufactured by GAL, ECI and others. Current-feedback
control allows smooth open and close while maintaining a safe 30lbs
or less at the door edge when obstructed via the "Torque" adjustment.
Uses existing cam slowdown switches on these operators. Six speeds
(3-open, 3-close), accel/decel, and torque adjustments make setup
and tuning easy. Quiet and efficient PWM motor output provides 3
amps to the door motor armature. Fixed field output for shunt-wound
motors. Can also be used with Permanent magnet replacement motors.
Supplied open-chassis with small footprint.
The
IPC D2000 controller is designed to work with 110V DC door operators
manufactured by GAL, ECI and others. Current-feedback
control allows smooth open and close while maintaining a safe 30lbs
or less at the door edge when obstructed via the "Torque" adjustment.
Uses existing cam slowdown switches on these operators. Six speeds
(3-open, 3-close), accel/decel, and torque adjustments make setup
and tuning easy. Quiet and efficient PWM motor output provides 3
amps to the door motor armature. Fixed field output for shunt-wound
motors. Can also be used with Permanent magnet replacement motors.
Supplied open-chassis with small footprint.