The
model D1086 is a low-cost, compact control designed to provide
a variable voltage to the shunt field windings of a motor
driven generator. Recommended for geared machines with series field
windings up to 350FPM. The D1086 accepts 0-10VDC as a reference to
achieve 1-180VDC output. The input signal can either be provided
by an external source or from the on-board 15VDC power supply. Provisions
are made for externally selected acceleration/deceration times are
are selected by "stepping-in" different resistance values
to terminals on the D1086. Input voltage is either 208 or 230 VAC
which generates a 5 amp (or 15 amp) continuous output rating. Direction
of the elevator is achieved via external UP/DOWN direction contactors
which invert the polarity of the DC output. Single phase 208/230
VAC input. Included is a comprehensive step-by-step manual for a
smooth and sucsessfull installation.
The
model D1086 is a low-cost, compact control designed to provide
a variable voltage to the shunt field windings of a motor
driven generator. Recommended for geared machines with series field
windings up to 350FPM. The D1086 accepts 0-10VDC as a reference to
achieve 1-180VDC output. The input signal can either be provided
by an external source or from the on-board 15VDC power supply. Provisions
are made for externally selected acceleration/deceration times are
are selected by "stepping-in" different resistance values
to terminals on the D1086. Input voltage is either 208 or 230 VAC
which generates a 5 amp (or 15 amp) continuous output rating. Direction
of the elevator is achieved via external UP/DOWN direction contactors
which invert the polarity of the DC output. Single phase 208/230
VAC input. Included is a comprehensive step-by-step manual for a
smooth and sucsessfull installation.