The
IPC Automation model C218 Hoist motor field/Brake controller is
a perfect fit for reliable low cost field or brake applications.
The C218 can be set for either brake or Field mode by simple configuration
of resistance at the input terminals. Provisions are made to readily
accept a third Input phase to momentarily boost the ouput DC voltage
to 150% of the nominal rating (approx. 270VDC max) for motor field
forcing at leveling speed or quick brake release. On-board user
adjustable sensing circuit detects output current to the field
or brake and operates a fail-safe relay if the current falls below
the preset point. Internal soft start ramp timing prevents hard
stops or starts. Robust design and on-board fuse protection prevents
control and/or wiring damge due to shorts or other sytem problems.
208/230 Vac input -0 to 180/270 VDC ouput. 15 DC amps continuous.
The
IPC Automation model C218 Hoist motor field/Brake controller is
a perfect fit for reliable low cost field or brake applications.
The C218 can be set for either brake or Field mode by simple configuration
of resistance at the input terminals. Provisions are made to readily
accept a third Input phase to momentarily boost the ouput DC voltage
to 150% of the nominal rating (approx. 270VDC max) for motor field
forcing at leveling speed or quick brake release. On-board user
adjustable sensing circuit detects output current to the field
or brake and operates a fail-safe relay if the current falls below
the preset point. Internal soft start ramp timing prevents hard
stops or starts. Robust design and on-board fuse protection prevents
control and/or wiring damge due to shorts or other sytem problems.
208/230 Vac input -0 to 180/270 VDC ouput. 15 DC amps continuous.