|
|
------------------------------------------------------------------------------------------------------------------
Encore
/ Digital Closed-Loop Door Controller
 
The
Encore from IPC Automation is a complete stand-alone, closed-loop door
operator controller system. This fully digital, microprocessor-based
system provides precise control of elevator doors via true door position
and velocity feedback from an encoder. The complete retrofit kit includes
motor, controller and limit switches. In just a few hours you can install
a complete state-of-the-art door control system.
- Simple to install: Pre-loaded setups with on-board display/data keys/open
and close switches.
- Position and speed sensing via reliable encoder.
- All digital, PWM control: Quiet 20Khz operation.
- Use with any controller: Direct Otis 6970 Retrofit, just bolt on
and wire! GAL style also available (support for other manufacturers
coming
soon).
- Eliminates "Cam Box" slow-down cam switches - all that's needed is
the DOL and DCL (supplied).
- Nudging Input: Separate input with adjustable speed and torque.
- Accurate code and limit to limit times from the encoder and computer
clock. No more arguments over the stop watch!
- Open, Close, Nudge and "EX" (Aux.) inputs - 24 to 120 VAC or VDC
- can also operate from a single input.
- DOL, DCL and "EX" (Aux.) outputs - 24 to 230 VAC/VDC solid-state.
"Ex" output can be configured as "Pre-Close Limit", "Running", etc.
- Easy adjustments using setup menu:
- 16 character LCD display for easy confirmation of setups, I/O
and status-SAE or metric values!
- Auto-learning with pre-defined speed/opening profiles.
- All setups and parameters stored in flash memory - change at
any time!
- 115 vac input - can also operate on 130 VDC input.
- Optional analog output for display of Torque, Position and Velocity
- for connection to scope or chart recorder-document door performance!
Click Here for Specifications
------------------------------------------------------------------------------------------------------------------
 D3000
The IPC D3000 controller is designed to work with 110/220V DC door operators
manufactured by OTIS, GAL and others. "Quasi" closed-loop current
feedback and control allows fast open and close door times while maintaining
a safe 30lbs or less at the door edge when obstructed. Uses existing cam slowdown
switches on these operators. The D3000 operates at either 120 or 220VAC input.
Six speeds, adjustable accel/decel, nudge speed and obstruction/ torque adjustments
make setup and tuning easy. Quiet and efficient PWM motor output provides 6
amp continuous to the door motor armature. Adjustable Running and Standby field
output for shunt-wound motors. Can also be used with Permanent magnet replacement
motors. Supplied open-chassis with small footprint.
Click Here for Specifications
 D2000
The IPC D2000 controller is designed to work with 110V DC door operators
manufactured by GAL, ECI and others. Current-feedback control allows
smooth open and close while maintaining a safe 30lbs or less at the door
edge when obstructed via the "Torque" adjustment. Uses existing
cam slowdown switches on these operators. Six speeds (3-open, 3-close),
accel/decel, and torque adjustments make setup and tuning easy. Quiet
and efficient PWM motor output provides 3 amps to the door motor armature.
Fixed field output for shunt-wound motors. Can also be used with Permanent
magnet replacement motors. Supplied open-chassis with small footprint.
Click Here for Specifications
IPC Automation
4615
W. Prime Parkway
McHenry, IL 60050-7037
Phone:
|
815-759-3934
|
Toll Free
|
800-323-1691
|
Fax:
|
815-363-1641
|
E-Mail:
|
ipcsales@msn.com
|
|
